ECT PWR Switch Extension Harness with Dash Light Pigtail
I don't use the ECT PWR switch often (mostly when towing our boat or jet ski) but when I want to use it I'd prefer it in a more convenient, visible location. For me, I have a cell phone cup holder that blocks the switch in it's factory location, plus I have to reach down and around to get to it. My solution was to relocate it to furthest left on the drivers side - higher, more visible, and easier to reach. My secondary motivation is to free up buttons locations for future heated seats.
For this mod to happen I needed to extend the factory harness by 30". The harness shown below is plug-and-play with not cutting of factory wires - simply unplug the ECT PWR switch, plug the extension harness into the factory harness, route the extension harness to the drivers side and plug in the ECT PWR switch. There are many Internet posts on how to rewove Tacoma dash panels so those steps aren't included here. Also, tap off of the provided dash illumination pigtails (power & variable ground).
Auto High Beam \ ECT PWR Button Jumper with Dash Light Pigtail
This plug-and-play mod simply provides an auxiliary dash illumination power source for additional\future option buttons. Simply plug in the jumper harness into either the Auto High Beam or ECT PWR buttons and tap off of the provided dash illumination pigtails (power & variable ground). I also offer a pigtail splitter providing three power sources.
Dash Illumination Light Pigtail Splitter
A simple splitter that goes from 1-to-3 dash illuminations pigtails
OEM Tacoma Tonneau Cover Custom Mid-Straps Straps
Open your OEM tonneau cover only a 1/3 of the way with these custom straps.
Other Mods
Along with these listed mods, I'm trying to gauge interest if an extension harness for the BSM & Parking Assist buttons is something folks are interested in.
-------------------------------------------------------------------------------------------------------------------------
$34.00/$44.00 - ECT PWR Switch Extension Harness with Dash Light Pigtails
$24.00/$34.00 - Auto High Beam \ ECT PWR Button Jumper with Dash Light Pigtails
$39.00 - OEM Tacoma Tonneau Cover Custom Mid-Straps Straps
** USPS Domestic First Class Shipping Included in Costs Shown Above **
You can purchase via PayPal or Venmo by shooting me an e-mail
I encourage folks to email me at; bob.hogan1@gmail.com with any questions or comments.
I look forward to any feedback or suggestions. Thanks, Bob
-------------------------------------------------------------------------------------------------------------------------
ECT PWR Switch Extension Harness with Dash Light Pigtail (~30")
(1) Pigtails - $34 Delivered
(3) 16" Pigtails $44 Delivered
(USPS Domestic First Class)
This photo shows the typical factory location of the ECT PWR switch (center console)
This photo shows the new location of the ECT PWR switch (drivers side left). I moved the traction control button to the right.
~30" extension harness to move the switch, which also
includes a dash illumination pigtail for future option buttons.
Each option button is keyed on both the left and right, to fit into predefined dash openings. You will need to use a small file to rekey the dash opening for the specific button(s) you are moving.
This is a quick simple process and the highlighted image is just one example. The Traction Control button also required me to rekey the dash button hole.
Freed up button location where the ECT PWR button was.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Tacoma 3rd Gen Auto High Beam Jumper with Dash Light Pigtail (~7")
(1) Pigtails - $24 Delivered
(3) 16" Pigtails $34 Delivered
(USPS Domestic First Class)
Pigtail jumper plugs into back of Auto high beam headlight switch
The jumper can also be used with the ECT PWR switch in left or center dash location
Factory auto high beam switch connection
Use connection point shown, then feed dash illumination
pigtail (with optional splitter) in and down
Tacoma OEM Hard Tonneau Cover Custom Mid-Straps
$39 Delivered!
(USPS Domestic First Class)
KIT CONTAINS
TOOLS REQUIRED
Photos Below Shown on Driver Side of Cover
Duplicate Installation Process on Passenger Side
This kit is an aftermarket tonneau cover modification
Buyer\installer assumes all associated installation and usage risks
Follow Notes and Measurements in Diagram Above
Follow Notes and Measurements in Diagram Above
Follow Notes and Measurements in Diagram Above
Connect Clips and Tighten Strap
Strap Clips on Underside of Middle Panel
Copyright © 2021 Kabowest - All Rights Reserved.
Powered by GoDaddy Website Builder